Skip to main content

Quantum Upgrade: Scientists May Have Just Solved Fusion’s Biggest Problem




Researchers have developed a method to enhance fusion energy efficiency by optimizing fuel mixtures and employing spin polarization.

This approach could significantly reduce tritium usage, leading to smaller and more manageable fusion reactors with lower operational costs and enhanced safety features.

Enhanced Fusion Fuels for Practical Energy

A new study published in the journal Nuclear Fusion suggests that modifying fusion fuels could address key challenges in making fusion a more practical energy source.

The approach builds on the established use of deuterium and tritium, the most promising fuels for fusion energy, but enhances their quantum properties through a technique called spin polarization. This method involves aligning the quantum spins of about half the fuel atoms for improved performance. Additionally, the proportion of deuterium in the fuel mix would be increased from the typical 60% or more, further optimizing efficiency.

Models developed by researchers at the U.S. Department of Energy’s Princeton Plasma Physics Laboratory (PPPL) show that these adjustments allow tritium to burn significantly more efficiently while maintaining fusion power output. The result is a substantial reduction in the amount of tritium required to initiate and sustain fusion reactions, paving the way for smaller, more cost-effective fusion systems.

“Fusion is really, really hard, and nature doesn’t do you many favors,” said Jason Parisi, a staff research physicist at the Lab and first author on the research paper. “So, it was surprising how big the improvement was.”

The paper, which was published in the journal Nuclear Fusion, suggests the approach could burn tritium as much as 10 times more efficiently. The research also underscores PPPL’s role at the forefront of fusion innovation, particularly when it involves a system such as the one studied in Parisi’s research, where gasses are superheated to create a plasma confined by magnetic fields into a shape similar to a cored apple. The Lab’s primary fusion device, the National Spherical Torus Experiment-Upgrade (NSTX-U), has a similar shape to the one the researchers considered when they tested their approach.
“This is the first time researchers have looked at how spin-polarized fuel could improve tritium-burn efficiency,” said staff research physicist and co-author Jacob Schwartz.

Maximizing Tritium Burn Efficiency

PPPL principal research physicist and co-author of the paper Ahmed Diallo likens tritium-burn efficiency to the efficiency of a gas stove. “When gas comes out of a stove, you want to burn all the gas,” Diallo said. “In a fusion device, typically, the tritium isn’t fully burned, and it is hard to come by. So, we wanted to improve the tritium-burn efficiency.”

The PPPL team consulted the fusion community and the broader community involved in spin polarization as a part of their work to find ways to enhance tritium-burn efficiency. “Fusion is one of the most multidisciplinary areas of science and engineering. It requires progress on so many fronts, but sometimes there are surprising results when you combine research from different disciplines and put it together,” Parisi said.

The Role of Quantum Spin in Fusion

Quantum spin is very different from the physical spin on a baseball. For example, a good pitcher can throw the ball with one of several different spins. There is a continuum of possibilities. However, there are only a few discrete options for the quantum spin on a particle – for example, up and down.

When two fusion fuel atoms have the same quantum spin, they are more likely to fuse. “By amplifying the fusion cross section, more power can be produced from the same amount of fuel,” said Parisi.

While existing spin-polarization methods don’t align every atom, the gains shown in the PPPL model don’t require 100% spin alignment. In fact, the study demonstrates that modest levels of spin polarization can substantially improve the efficiency of the tritium burn, improving overall efficiency and reducing tritium consumption.

Potential and Challenges of Spin-Polarized Fuel

With less tritium required, the overall size of the fusion power plant can be reduced, making it easier to license, situate and construct. Collectively, this should lower the operating costs of the fusion system.

Tritium is also radioactive, and while that radiation is relatively short-lived compared to the spent fuel from nuclear fission reactors, reducing the amount required has safety benefits because it decreases the risk of tritium leakage or contamination.

“The less tritium you have flowing through your system, the less of it will get into the components,” said Parisi. The storage and processing facilities required for the tritium can also be made much smaller and more efficient. This makes things like nuclear licensing easier. “People think that the site boundary size is somewhat proportional to how much tritium you have. So, if you can have a lot less tritium, your plant could be smaller, faster to get approved by regulators, and cheaper.”

New Avenues to Explore

The DOE’s Office of Science has funded separate research about some of the technologies needed to inject the spin-polarized fuel into the fusion vessel. Further work is needed to investigate things needed to implement the proposed system but have yet to be fully explored. “Whether it’s possible to have integrated scenarios that maintain a high-grade fusion plasma with these specific flows of excess fuel and ash from the plasma needs to be determined,” Schwartz said.

Diallo said there are also potential issues related to polarization methods, but these create opportunities. “One challenge would be to demonstrate techniques to produce spin-polarized fuel in large quantities and then store them. There’s a whole new technology area that would open up.”

Website: International Research Awards on High Energy Physics and Computational Science.

#HighEnergyPhysics#ParticlePhysics#QuantumPhysics#AstroparticlePhysics#ColliderPhysics#HiggsBoson#LHC#QuantumFieldTheory#NeutrinoPhysics#PhysicsResearch#ComputationalScience#DataScience#ScientificComputing#NumericalMethods#HighPerformanceComputing#MachineLearningInScience#BigData#AlgorithmDevelopment#SimulationScience#ParallelComputing

Comments

Post a Comment

Popular posts from this blog

Physicists observe a new form of magnetism for the first time

MIT physicists have demonstrated a new form of magnetism that could one day be harnessed to build faster, denser, and less power-hungry " spintronic " memory chips. The new magnetic state is a mash-up of two main forms of magnetism: the ferromagnetism of everyday fridge magnets and compass needles, and antiferromagnetism, in which materials have magnetic properties at the microscale yet are not macroscopically magnetized. Now, the MIT team has demonstrated a new form of magnetism , termed "p-wave magnetism." Physicists have long observed that electrons of atoms in regular ferromagnets share the same orientation of "spin," like so many tiny compasses pointing in the same direction. This spin alignment generates a magnetic field, which gives a ferromagnet its inherent magnetism. Electrons belonging to magnetic atoms in an antiferromagnet also have spin, although these spins alternate, with electrons orbiting neighboring atoms aligning their spins antiparalle...
Post a Comment
Read more

new research in qauntum physics

         VISIT:https: //hep-conferences.sciencefather.com/          N ew research in  qauntum physics.                                                    Alphabet Has a Second, Secretive Quantum Computing Team Recent research in quantum physics includes the development of quantum computers, which are expected to be much more powerful than conventional computers and could revolutionize many aspects of technology, such as artificial intelligence and cryptography. Other research includes the development of quantum sensors for a variety of applications, including medical diagnostics, and the study of quantum entanglement and its potential to enable quantum computing and secure communication. Additionally, research is being conducted into the applications of quantum mechanics in materials science, such as unde...
Post a Comment
Read more

Scientists Discover New “Hall Effect” That Could Revolutionize Electronics

Scientists discovered a new Hall effect driven by spin currents in noncollinear antiferromagnets, offering a path to more efficient and resilient spintronic devices . A research team led by Colorado State University graduate student Luke Wernert and Associate Professor Hua Chen has identified a previously unknown type of Hall effect that could lead to more energy-efficient electronic devices . Their study, published in Physical Review Letters, was conducted in collaboration with graduate student Bastián Pradenas and Professor Oleg Tchernyshyov of Johns Hopkins University. The researchers uncovered evidence of a new property, dubbed the “Hall mass,” in a class of complex magnetic materials known as noncollinear antiferromagnets . The traditional Hall effect, discovered by Edwin Hall at Johns Hopkins in 1879, describes how an electric current is deflected sideways when subjected to an external magnetic field, generating a measurable voltage. This effect plays a crucial role in technologi...
Post a Comment
Read more